1050 Aluminium closure sheet
- Condition: New
- Delivery port: Qingdao or Tianjin port, China
- Payment term: L/C, T/T
- Guarantee period: 12 months
- Delivery time: 10-15 days after received deposit
- Installation time: 20days
1050 Aluminium closure sheet is used for the bottle cap market. Using a unique rolling technology, Haomei supplies aluminium sheets ideally suited to manufacture the caps for long neck wine bottles, extremely deep drawn and decorated closures, plus a range of pilfer proof caps for beverage bottles, soft drink, juice, isotonic beverage, energy beverage, and other products, such as the 30x60 mm specifications are often used in the wine and spirits segment.
1050 Aluminium Closure Sheet - The ideal material for the production of bottle closures:
- is light weight
- is easily and economically recycled
- has superior barrier qualities
- has good formability
- offers a bright finish for decoration.
Specifications
| Alloy | Temper | Thickness | Width | Length | Coil | Strip | Earing | Diagonal |
|
1050 |
H14, H16, H24, H26 |
0.15~0.25 mm (+/-0.005mm) |
500~1000 mm (+0.5mm, -0mm) |
500~1000 mm (+0.5mm, -0mm) |
500~1000 mm | 20~500 mm | 1 | ≤ 1mm |
Chemical Compostions Aluminium closure sheet
| Alloy | Fe | Si | Cu | Mn | Mg | Cr | Zn | Ni | Ti | Other | Al | |
| Each | Total | |||||||||||
| 8011 | 0.60~1.0 | 0.50~0.9 | 0.1 | 0.2 | 0.05 | 0.05 | 0.1 | - | 0.08 | 0.05 | 0.15 | Remain |
| 1050 | 0.7 | 0.6 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | 0.4 | - | 0.1 | 0.05 | 0.15 | Remains |
Mechanical Property for Direct Casting
| Alloy | Temper | Thickness (mm) | U.T.S (Mpa) | Elongation (%) |
| 8011 | H14 | 0.15~0.25 | 125~155 | ≧2 |
| 1050 | H14 | 0.15~0.25 | 150~200 | ≧1 |
The supplier of choice – Haomei 1050 Aluminium Closure Sheet
Haomei Aluminium Closure Sheets are suitable for both transparent and non-transparent lacquering, and will not bend during curing process. For applications requiring deep drawing, such as long caps, Haomei aluminium closure sheets show very low earing, greatly reducing scrap rate for our clients.
Haomei Aluminum closure sheet is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Its strength, high formability, low earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.
Packing & Delivery for 1050 Aluminium Closure Sheet
we will suggest you the best suitable solution according to your requirement >>
Products Category
Inquiry
| (Please write down the product model or any requirement) | |
| E-mail: | |
| Message: | |
Contact Information
E-mail:alu@haomeicn.com
Tel: +86-371-65621391
Fax:+86-371-65621393
Add : No.14 Waihuan Road,New strict,Zhengzhou,China