printed aluminium closure sheet

printed aluminium closure sheet  for pilfer proof caps
1.         Alloy: 8011, 3105
2.         Temper: H14,  H16
3.         Pattern: rolled, degreased, pre-lubricated, pre-treated, lacquered
4.         Thickness: 0.17-- 0.25mm
5.         Width: 400 ~ 1000mm
6.         Length: 500 ~ 1000mm
7..         Origin: China
High temperature resistant without any distortion and color change;
The paint won't peel off during production;
Tensile Strength: 140-145mpa
Yield Strength: 136-137;
Elongation: 2.5-3.0%;
Earing Rate: <2%;
It's the best material for medicine/wine caps;
Small order is acceptable.
Payment Terms: 30% by TT in advance as deposit and 70% balance by TT or L/C at sight;
Lead Time: Within 20 days after receiving deposit

Specifications

Alloy	Temper	Thickness	Width	Length	Coil	Strip	Earing	Diagonal
3105	H14, H16, H24, H26	0.15~0.25 mm (+/-0.005mm)	500~1000 mm (+0.5mm, -0mm)	500~1000 mm (+0.5mm, -0mm)	500~1000 mm	20~500 mm	1	≤ 1mm

Chemical Compostions printed aluminium closure sheet

Alloy	Fe	Si	Cu	Mn	Mg	Cr	Zn	Ni	Ti	Other		Al
										Each	Total
8011	0.60~1.0	0.50~0.9	0.1	0.2	0.05	0.05	0.1	-	0.08	0.05	0.15	Remain
3105	0.7	0.6	0.3	0.3~0.8	0.2~0.8	0.2	0.4	-	0.1	0.05	0.15	Remains

Mechanical Property for Direct Casting

Alloy	Temper	Thickness (mm)	U.T.S (Mpa)	Elongation (%)
8011	H14	0.15~0.25	125~155	≧2
3105	H14	0.15~0.25	150~200	≧1

Packing & Delivery  for printed aluminium closure sheet

Interested Products:
Company Name:
Country:
Email Address:
Tel/Cellphone:
Messages: